Thinklogical VX160 Router Used With the Q-4300 Quick Start Guid Bedienungsanleitung PDF herunterladen

Extend Distribute Innovate

Local

DVI OUT

Module 1

Local

DVI OUT

Module 2

Local

DVI OUT

Module 3

Local

DVI OUT

Module 4

DVI OUT DDC

Module 1

DVI OUT DDC

Module 2

DVI OUT DDC

Module 3

DVI OUT DDC

Module 4

DVI IN

Module 4

DVI IN

Module 3

DVI IN

Module 2

DVI IN

Module 1

Source CPU

L1: Data TX to RX and Video

L2: Data RX to TX

External Control CPU

Network

Hub

STEP 8: Connect the Controller

Cards’ LAN Ports to your

Controller CPU with CAT5 cables.

(CPU IP address: 192.168.13.9)

Optional Secondary

Controller Card

IP address: 192.168.13.16

Primary Controller

Card IP Address:

192.168.13.15

QUICK-START GUIDE

As used with Thinklogical’s™

Q-4300 Video Extension System

Thinklogical’s™ VX160 KVM Matrix Switch features

redundant Power Supplies and Controller Modules for

uninterrupted performance, even during system

reconfiguration, updates or debug. The VX160 remains

fully functional with only one Power Supply installed or with

one Controller activated.

NOTE: When using a single Controller, the module on the

left (Primary) must be used.

POWER SUPPLY 1 (LEFT):

POWER SUPPLY 2 (RIGHT):

FANS:

TEMPERATURE WARNING:

TEMPERATURE SHUTDOWN:

CPU:

INPUT/OUTPUT CARDS:

ANY OF THE ABOVE

COMMON

GROUND

The VX160 Router Critical Hardware Alarms: (Located at the top, left rear of the unit.)

Fan failure, temperature spikes, DC voltage and/or current out of range, AC power input interruption and module removed

Individual fan monitoring

Chassis over temperature, multiple sensors

Chassis over temperature causing shutdown

Card failure (Only with a redundant card)

SFP+ failure, laser output fault

STEP 1: Connect your Q-4300 Receiver

Modules to the VX160 using multi-mode fiber-

optic cables (up to 1000 meters). Connect L1 to

any Transmit Port and L2 to the same numbered

Receive Port. Do the same for each of the four

Receiver modules.

STEP 2: Install the Right Power

Supply Module AC Power Cord

(Left receptacle) and the Left Power

Supply Module AC Power Cord

(Right receptacle). Plug both

Receiver AC Cords into a standard

AC source. On the front of the

chassis, turn ON the Right and Left

Power Supply Modules.

STEP 3: Connect a monitor

to each of the DVI OUT DDC

ports with a standard DVI

cable. A second, non-DDC

monitor may also be

connected to each modules’

DVI OUT port.

STEP 4: Connect your Q-4300 Transmitter Modules to the VX160 using multi-mode

fiber-optic cables (up to 1000 meters). Connect L1 to any Receive Port and L2 to the

same numbered Transmit Port. Do the same for each of the four Transmitter modules.

STEP 5: Install the Right Power Supply Module AC Power

Cord (Left receptacle) and the Left Power Supply Module

AC Power Cord (Right receptacle). Plug both Transmitter AC

Cords into a standard AC source. On the front of the chassis,

turn ON the Right and Left Power Supply Modules.

STEP 6: Connect a DVI IN cable from the Source CPU to the

DVI IN ports of each Transmitter Module. If desired, connect

a local monitor to each of the Transmitters’ DVI OUT ports

with a standard DVI cable. Ensure the CPU is turned ON.

STEP 9: Connect both supplied AC

Power Cords (PWR-0000056-R) to

the receptacles located on the

VX160's power supplies. Plug each

one into a standard AC source.

Verify that all system functions are

operating properly.

PHONE: 1-800-291-3211

WEBSITE: www.thinklogical.com

EMAIL: [email protected]

Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products.

Q-4300_Single-Link_VX160_Rev_A

Q-4300: 4 Transmitter Modules

Q-4300:

4 Receiver Modules

KVM Matrix Switch

MRTS Technology

VX160

router

STEP 7: If stereo 3-D molecular

visualization on your desktop is

desired, connect the Stereo OUT

from the CPU to the Transmitter

Module’s STEREO INPUT.

Connect a 3-D Active Stereo

Emitter to the STEREO OUT

receptacle on the Receive module.

Thinklogical’s Q-4300 Chassis can accommodate

four modules in any combination of Transmitter,

Receiver or both. The Q-4300 Chassis will also

accommodate SDIXtreme 3G+ Transmitter and

Receiver Modules. Ask your sales representative

for more information or visit us on the web at

www.thinklogical.com

QUICK-START GUIDE 1

Inhaltsverzeichnis

Seite 1 - QUICK-START GUIDE

Extend Distribute InnovateLocalDVI OUT Module 1LocalDVI OUT Module 2LocalDVI OUT Module 3LocalDVI OUT Module 4DVI OUT DDCModule 1DVI OUT DDC Mod

Kommentare zu diesen Handbüchern

Keine Kommentare

Thinklogical VX160 Router Used With the Q-4300 Quick Start Guid Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Videoüberwachungssysteme Thinklogical VX160 Router Used With the Q-4300 Quick Start Guid herunter. Thinklogical VX160 Router Used With the Q-4300 Quick Start Guide User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Videoüberwachungssysteme Thinklogical VX160 Router Used With the Q-4300 Quick Start Guid