Thinklogical Router Interfaces Bedienungsanleitung PDF herunterladen (Seite 13)

17600 – System Data

System data consists of 18 bytes. The first two bytes have the current alarm contact

settings (big-endian). Each bit corresponds to a contact. Bit 0 of byte 1 is the bit for the

Power Supply 1 alarm, and bit 1 of byte 0 is the bit for the 'any' alarm. The next five bytes

are for the installed card inventory. A '0' bit means the card is installed and a '1' bit means

the card is removed. The other bytes are for internal use.

17601:17640 – Card Data

Each I/O card in the VxRouter has an associated TCP port. Card 1 uses port 17601, card 2

uses 17602, and so on. The data is formatted as follows:

• 12 bytes, internal use

• 1 byte, card type

◦ 0xff missing

◦ 0x02 installed

• SFP data, 256 bytes per SFP, 16 SFPs per card

◦ 128 bytes, SFP ID data

◦ 128 bytes, SFP diagnostic data

Nov 3, 2014 Router Interfaces: VX320 13/25

Table 3: Vx320 System Data

Alarms Inventory

Byte Byte Byte Byte Byte Byte Byte

Bit 0 1 2 3 4 5 6

0 Alarm 9 Alarm 1 Upper Card 1 Upper Card 9 Upper Card 17 Lower Card 5 Lower Card 13

1 Alarm 10 Alarm 2 Upper Card 2 Upper Card 10 Upper Card 18 Lower Card 6 Lower Card 14

2 Alarm 3 Upper Card 3 Upper Card 11 Upper Card 19 Lower Card 7 Lower Card 15

3 Alarm 4 Upper Card 4 Upper Card 12 Upper Card 20 Lower Card 8 Lower Card 16

4 Alarm 5 Upper Card 5 Upper Card 13 Lower Card 1 Lower Card 9 Lower Card 17

5 Alarm 6 Upper Card 6 Upper Card 14 Lower Card 2 Lower Card 10 Lower Card 18

6 Alarm 7 Upper Card 7 Upper Card 15 Lower Card 3 Lower Card 11 Lower Card 19

7 Alarm 8 Upper Card 8 Upper Card 16 Lower Card 4 Lower Card 12 Lower Card 20

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Keine Kommentare

Thinklogical Router Interfaces Bedienungsanleitung Seite 13